Passion for Precision

Sunday, August 9, 2009

FIRST LIGHT - LOOKING AT NEW PARTS FOR THE AIRFIX SATURN V REISSUE




A MAT IRVINE REVIEW
About mid-August you should be able to buy the reissued Airfix Apollo Saturn V kit. You’ll immediately note that there is new box-art, showing the huge rocket heading for orbit. However, what may not be apparent is that this issue now has the upper - Apollo - sections corrected. All previous issues (and the kit was first issued 40 years ago, in 1969) have been incorrect.

It was wrong in two aspects. Firstly, the Service Module (SM) - the cylindrical part below the conical crew-carrying Command Module (CM) - was too thin. Consequently, this affected the Boost Protective Cover (BPC) that covered the CM at launch, and the Spacecraft Lunar Module Adaptor (SLA) that housed the Lunar Module (LM). The height of the SM was correct, but the diameter was too small.

Secondly, the Service Module had the wrong radiator pattern. It showed a Block I pattern, which was correct for uncrewed flights, but all manned flights used a Block II SM, with a different radiator pattern. Airfix was not the only company guilty of this - Saturn V rocket kits from Monogram, Revell and AMT also had the Block I pattern.

The only kit from a mainstream manufacturer, (as against a ‘garage’ or specialist), with the Block II was the 1:32 scale Monogram Command Service Module (CSM). This has been recently reissued by both Revell US and Revell Germany - see SMN’s previous post on this subject.

But now you can add the Airfix kit to the ‘got it almost right’ list, even if corrections have waited until the 40th anniversary of Apollo 11. There are nine newly-tooled parts: the SM is new, and this has entailed new bulkheads, SLA and BPC. Just one niggle though - the Command Module has not been re-tooled, so its diameter is still too small, but frankly, you can’t see it anyway when the BPC is in place.

The pictures show the attractive new box-art (top), the assembled rocket (middle) and note here that the original rectangular base has returned. The bottom picture shows the new-tool Apollo parts (far right) compared to the old.

Visit Airfix here.

1 comments:

  1. Hi, I was given this kit for Christmas, but having just opened it discovered the instructions are missing. Can anyone help or advise how to obtain them? My email is allthe.brewers@virgin.net Thanks for any help. John Brewer

    ReplyDelete