Passion for Precision

Friday, May 24, 2013

DEADLY MISSILE ARSENAL: 1:144 SCALE COLD WAR NUCLEAR KILLERS FROM MONOGRAM



Mat Irvine: A newly-reissued Cold War missile set from Monogram, featuring 20 missiles from the opposing forces, all to the same 1:144 scale.


This latest reissue kit dates from 1985, a time when, although the Cold War was approaching its end, the USA and USSR still had vast stockpiles of missiles. Reflecting this, the kit features nine missiles from the USA and 11 from the USSR.

This is the third missile set Monogram has made over the years. The first, the US Missile Arsenal, was issued as long ago as 1958. This was modified as the US Space Missiles set in 1969, itself reissued in Monogram’s Heritage Edition in 1983. Both sets were in the larger, though non-standard, 1:128 scale.


The 1985 set (above) on which this latest reissue is based had no tooling connections with the earlier sets, and was titled US and USSR Missile Display. It was reissued in SSP (Selected Subjects Program) Phase 4, in 1993. Now in 2013, this latest reissue has modified box-art and an adjusted name, the ‘US’ becoming ‘USA’.


It’s an impressive kit to build and display, though not so much if you like lots of components. It has just 45 parts in all, about the bare minimum that you would need to build all those missiles, as well as a display base and decal sheet. The base measures 323mm (12.75in) across, divided into USA at left, USSR on the right.


For the USA (below) you get the land-based Titan II, Minuteman III, Peacemaker and Pershing II. Then there are the sea-launched Polaris A3, Poseidon and Trident. A pair of cruise missiles are included, the ALCM (Air Launched Cruise Missile) and sea-launched Tomahawk.


The Soviet contributions to the set (below) are listed by their US Department of Defense designations, consisting of ‘SS’ plus a NATO codename. These are the SS-18 Satan, SS-4 Sandal, SS-13 Savage, SS-17 Spanker, SS-19 Stiletto and SS-20 Saber. Sea-launched missiles are the SS-N-8 Sawfly, SS-N-17 Snipe, SS-N-18 Stingray, plus the air-launched AS-6 Kingfish.


The construction of each missile model is by its very nature fairly simple, and each, bar one, consists of just two halves. This applies even to the Titan II which could have had separate engines, though an exception is the SS-18 which has four separate parts for the sustainer engines. However, each missile can be individualised with varying paint schemes and the odd decal. The colouring ends up with US missiles being mostly white, Soviet missiles mainly green or grey. There is one vice-versa however - the Soviet Kingfish can be finished in white, the two American cruise missiles painted grey.

For the record, most of the Soviet missiles are surface-to-surface types, so have the logical ‘SS’ designation. The SS-N-X series are sea-launched equivalents, while the AS-6 Kingfish is air-to-surface.

The SS-4 Sandal has the Soviet R-12 title, and was a development from the SS-3 Shyster, a missile not that far removed from the German V-2 rocket, of which both the Soviets and Americans got large numbers as spoils of war, after the defeat of Germany in 1945.

The SS-13 Savage (Soviet RT-2) is comparable to the US Minuteman, though with an open-truss inter-stage section, an arrangement also seen in the Vostok/Soyuz A-type space launcher.

Summation
A particularly interesting 1:144 scale Monogram reissue - the Cold War is now history, and the missiles are part of that. The assembled model looks extremely impressive on the display shelf, and while we could ask for more detail, the nuclear aggression represented here makes for fascinating viewing.

Wednesday, May 15, 2013

CALLING ON ALIENS? 1:48 SCALE VOYAGER SPACEPROBE FROM HASEGAWA



Mat Irvine: It’s perhaps a slightly odd decision for Hasegawa to model a spaceprobe that is more than 35 years old… but let us be pleased the company did, as it is a very interesting kit for any space enthusiast.


Two Voyager craft were launched in 1977, their mission to study the outer gas giant planets of the Solar System. Initially these were just Jupiter and Saturn, but Voyager 2 was redirected in mid-flight to go on to encounter Uranus and Neptune as well.


Currently the Voyagers are the most travelled objects to leave planet Earth, with Voyager 1 now some 18.5 billion km (12bn miles) from the Sun, far beyond the planets in the distant area known as the heliosphere.


Just over 80 parts make up the Hasegawa kit, which measures some 325mm (13in) to the end of the magnetometer boom. The components are supplied on two black plastic runners, plus one in white and one gold-plated for the onboard ‘Golden Record’ message disc carried by each craft ‘just in case’ a future civilisation encounters either of them. This runner also has one other part, of which more later. Last thing is a translucent blue stand (above) like those supplied with Hasegawa’s popular Egg Craft series.

The Voyagers are deep-space craft with no use for streamlining, so booms and equipment protrude all over the place from the central bus. Most distinctive is the long magnetometer boom that carries the sensors out and away from the main equipment.

The boom is actually a spiral device, spun out from a canister as the craft slowly rotates. It is the sort of thing that is impracticable to mould in injection styrene, but Hasegawa has had to go this route - with a bit of judicious painting it can be made to look reasonably accurate. 


But of course photo-etch parts would be better, and these are available from LVM Studios in the Netherlands. Leon van Munster’s additions include the magnetometer and science platform booms. These greatly enhance the look of the finished model, and are incorporated in the picture below.



Incidentally, the ‘twist’ built into Hasegawa’s styrene components is correct - to reproduce it with the LVM photo-etch equivalent, all you do is take the ends and twist gently.

Here, I have painted the base to resemble Uranus, one of the fly-by target planets. Oh, and one more thing - the other part on the gold-plated runner? It’s a small alien figure!


Review kit courtesy Hobby Link Japan.

Thanks to Leon van Munster at LVM Studios for the photo-etch boom sample.

Hasegawa Voyager kit available here.

Monday, May 13, 2013

INCOMING: TAMIYA F-4U 'BIRDCAGE' CORSAIR


Fans of big 1:32 scale will be pleased with the latest from Tamiya, due on display at the Shizuoka show in Japan in a few days time.


The F4U-1 Corsair, nicknamed 'Birdcage', was a big step on the way to the aircraft's final position as finest carrier fighter of World War II. It earned the nickname for the complex canopy framing, which had the unfortunate side-effect of severely interfering with the pilot's all-round vision. Once this was remedied by a frameless blown perspex canopy, the Corsair's place as a successful combat machine was assured.


As for Tamiya's kit, we don't have too many details yet, but these cgi development drawings are enough to whet our appetites for the real thing.

Looks like there will be plenty of detail in the cranked wing, with landing gear, flaps, and wing-fold mechanism all being featured. Mind you, Tamiya's smaller 1:48 Corsair is already an excellent kit, so we expect this new one to be a knockout. When assembled, the 1:32 Corsair should be pleasingly substantial, with a wingspan of some 391mm (15.4in).


The early development XF4U-1 aircraft (below) had little of the visual finesse shown by production machines. The high dorsal spine gave it a totally different look to the final design.


Massive propeller shows clearly (below) as a Corsair powers up for a carrier takeoff in the Pacific Theatre.


Another mission ends safely as a Corsair successfully catches the wire during a carrier landing.


Corsairs of various types and scales here, including the Tamiya 1:48 scale kit, which includes a nicely moulded motor tug.

Friday, May 10, 2013

DEADLY NIGHTSHADE FROM ITALERI: MARTIN B-57G NIGHTHAWK TO I:72 SCALE


Italeri’s 1:72 scale Martin B-57G Nighthawk is one of those golden oldie model kits that’s been around for a looong time. But it remains an interesting subject, representing a highly successful early medium jet bomber.



The new release is much the same as before, with a 277mm (10.9in) wingspan, and adequate, if hardly state-of-the-art detailing. Fuel tanks and ordnance are included, as is the big two-piece nose radome. We’d just love to see a detail-up version, with engines, ground crew and bomb trolleys in the box.


Decals
However, Italeri has at least seen fit to add a choice of unit markings, and if you haven’t built a B-57 before, it could be an interesting way to while away some evenings at the workbench.



Specialist choices
A more unusual build for kit-bashers and keen converters would be one of the many specialist B-57s that have flown. The B-57 series listed a host of variants, a couple of which we show here. First off, the long-wing WB-57F Air Weather Service civilian version, flown by the NASA space agency from the Johnson Space Center.


Missile tester
The other is the ‘schnozz-nose’ B-57E (below) fitted with the sharp end of a Boeing Bomarc surface-to-air missile for radar testing.



About the B-57
The Martin B-57 was a twin-jet engine tactical bomber, based on the British Canberra, a design that included the first unrefuelled east-west Atlantic crossing among its many aviation records.

The B-57G was developed as night intruder, clearly recognizable by the added Pinocchio-style nose radome and target designator. It was an important machine in the US arsenal during the Vietnam War, not least for support missions against the infamous the Ho Chi Minh supply trail from the north.

More on B-57 models at SMN here.

Airfix and Revell B-57 kits here, Italeri due soon.


Wednesday, May 8, 2013

SMALL-SIZE CARS, FULL-SIZE CARS: REPORT FROM AUTOMODELLISMO 2013


 

Mat Irvine: Last Sunday saw the third Automodellismo Show for auto miniatures, held in Hanslope, near Milton Keynes, UK.


Inside the show hall, there were plenty of model car displays. These came from model clubs from the surrounding areas, including Watford, West Berkshire and Milton Keynes. Add to this the Car and Bike SIG (Special Interest Group), the model resource Britmodeller, Locate and Cement, MRO F1 Engineering, Ian and Rod Knott’s ‘Motor Museum in Miniature’, Alex and Tony’s comprehensive Motorsports Table. Individual models included (below) this highly-modified AMT Ford Model T custom, by Watford club member Jon Rackham.


Miniature variety
All this, plus a selection from co-organiser Mat Irvine’s large collection, and you had an amazing variety of miniature autos on display. Co-organiser Paul Fitzmaurice (below) of little-cars.com had a fine selection of products for sale.


Outside the hall
There was certainly a mixed bunch of interesting full-size vehicles parked outside the show hall. Two Ford Mustangs, a classic Jaguar XJ6, Triumph GT6, MG-TF, Bond Equipe and a Volvo 760 estate.


Extraordinary estate
In case you are wondering how the seemingly ordinary Volvo sneaked in, it’s probably the only Volvo that’s a custom ‘hopper’, with hydraulics powering the suspension to allow the car to move up and down, front and back, or side to side.


Add to this a special paint finish on the outside, and purple crushed-velour interior. So yes, it certainly qualifies as ‘interesting’.



Automodellismo 3 round-up
One of the show’s kit-sellers (below) Vince Brown of Models For Sale.



Above, a long Le Mans-style lineup from the Car and Bike SIG (above). The neat wood plinths add a touch of class.



Above and below, fantastic range of models on the comprehensive ‘Alex and Tony’s Motorsport Table.’



Part of the ever-changing ‘Motor Museum in Miniature’ (below) from Ian and Rod Knott. This won the 2011 ‘Best in Show’ Award.



Below, two views of a small selection of co-organiser Mat Irvine’s model car collection.



Close-up details (below) of the ‘Best in Show’ winner, the MRO F1 Engineering group, which  specialises in 1:12 scale Formula 1 cars.





MRO F1 Engineering’s Mark Oakley (below left) receives the 2013 ‘Best in Show’ trophy from Colin Hughes, builder of the Volvo hopper estate.


The MRO F1 Engineering crew (below) admire their trophy.


Below, on the Britmodeller stand, the Airfix Land Rover from Shaun the Sheep, with the three naughty pigs, Bitzer the sheepdog and Shaun’s cousin, Timmy.



Smallspace Show coming soon
Automodellismo is a HaMeX Event, one of three run over the year. The next show is smallspace 2, the show for everything on space, science-fiction and fantasy. It will be held on July 7, 2013. More on the main HaMeX website.

Plenty more model cars here.






Monday, May 6, 2013

INCOMING: 1:32 SCALE GLOSTER METEOR WORLD WAR II JET FROM HONG KONG MODELS



Here’s another big-scale aircraft from Hong Kong Models (HKM). It’s a 1:32 scale Gloster Meteor, the first British jet fighter, and first operational jet flying for the Allies in World War II.


The Meteor was a single-seater, so even at 1:32 scale, the model is not going to have the same arms-length wow-factor as HKM’s heavy bomber kits, the Flying Fortress and Lancaster.


But this ‘Meat-box’ jet isn’t at all tiny, having a wingspan of 355mm (14in) and fuselage length of 394mm (15.5in). As with the HKM Avro Lancaster, we don’t yet have build-up pix, but the cgi images are mouthwatering enough, particularly for anyone interested in either World War II or first-generation combat jets.


About the Meteor
The Meteor prototype first flew on March 5, 1943; the following summer, production machines were in service, flying against German V-1 flying bombs attacking London.

The Meteor (F Mk3 shown below) proved to be an effective machine, with a total of 3947 being built for the RAF and 17 other air forces, including those of Australia, Belgium and Israel.


Despite its simple design, the Meteor was a record-breaker, and in 1945 Group Captain HJ Wilson took the first official jet aircraft speed speed record, at 975km/h (606mph).

The last RAF Meteor was retired from duty in the 1980s. However, there are plenty of survivors on show in air museums, and five remain in airworthy condition.

Summation
Looks like another interesting HKM kit. There is no release date yet, but expect the HKM Gloster Meteor to be available soon.