Passion for Precision

Showing posts with label Moon. Show all posts
Showing posts with label Moon. Show all posts

Saturday, March 24, 2012

MOON GODDESS TAKES FLIGHT - AOSHIMA KAGUYA-SELENE MOON PROBE KIT



SMN update from Mat Irvine:
The Japanese kit company Aoshima continues to surprise us with brand-new kits in a growing range of satellites and space probes. 


Greek and Japanese fables
Number five in this Aoshima series is the JAXA (Japanese Space Agency) space probe that was initially - and appropriately - called SELENE, after the Greek Moon goddess, though the acronym stood for SELenological and ENgineering Explorer. However a public vote in Japan added the popular title Kaguya, after the lunar princess in an ancient Japanese fable. 

Mooncrash
Kaguya-SELENE was launched on September 14, 2007, reaching lunar orbit a few weeks later, on October 3. Its reconnaissance mission was designed to last until early 2009, after which the probe would have been deliberately crashed into the Moon’s surface, in August. However, due to a gyroscope failure, de-orbit went ahead earlier than planned, the probe hitting the Moon on June 10, 2009.


Transparent blue parts represent solar panels.


Aoshima kit components
The 1:72 scale kit follows a similar pattern to Aoshima’s previous space probes. The 69-part kit has a main rectangular spacecraft body, or bus, consisting of six parts, with small details taking up most of the other components - reaction control motors, lunar insertion motor, support connections to the H-II launch rocket, and a high-gain communications antenna.  


Checking details against a printout from the internet. Here the bus is first painted matt black


Smaller satellites on board
Kaguya also carried two sub-satellites. Initially named Rstar and Vstar, these too were renamed as Okina and Ouna, again after folklore characters.The surfaces of Okina and Ouna were mostly covered in solar panels, and in the kit these have been supplied in transparent blue plastic, though to look their best, the inner surfaces need to be painted silver, so the exteriors can gleam. At first glance, the two sub-sats look identical, but a closer look reveals that Okina’s top bulkhead is slightly different to that of Ouna.


Spraying metallized foil satin-black.


Foil improvement
As with previous Aoshima kits, the use of foil greatly improves the look of the model. But here the foil is not the normal gold or silver, instead being mostly black, to retain heat. So the usual silver or gold foil was simply sprayed satin black on one side, then spray-glued into place. Various areas on the bus that had been pre-painted silver were cut around, the foil carefully peeled off, allowing the silver panels to show through.


Wire rod antennas
One thing different with this model is that the four antennas for the Lunar Radar Sounding Experiment, are supplied as wire rod, as there’s no way that injection plastic would be strong enough. However, the extendable mast that carries the Lunar Magnetometer is plastic - and can be fitted retracted or extended. Overall, the model is not a big one - the bus is just 90mm (3.5 in) long, but the antennas are much longer - with these, the model’s dimensions go up to a far more impressive 430mm (16.9 in).
  

Delicate stand supplied
A stand is included, to hold Kaguya when finished, although it is slightly contrived - the probe is an awkward shape with the bus unbalanced by the single large solar panel on one side. This sort of thing may be fine for the free-fall conditions of lunar orbit, but not so good for display here in the Earth’s gravitational field - if in doubt, I recommend that you glue the model firmly in place!


The sub-satellites can be attached to the main bus, or displayed separately 


Return to the Moon
Intriguingly, Kaguya could be said to have helped restart major Moon explorations, as after this probe, JAXA had follow-on missions, as did the rising Asian space tigers, China and India.


Summation
Another kit that helps keeps us space fans happy. It’s of an unusual subject which is good too, as there are a mighty variety of Apollo and Shuttle kits out there already. So thanks to Aoshima for bringing us the kit, and thanks also to Hobby Link Japan for supplying the review model.

More Aoshima kits, including mouthwatering sci-fi subjects from Thunderbirds, Blue Thunder, Terminator, Star Trek, Aliens here.

Hobby Link Japan stock the Aoshima Kaguya (SELENE) here.

There's more
Decent pix of the Kaguya-SELENE mission are available via JAXXA - the flightpath was a long one, which saved fuel, compared with the quicker direct routes made by Apollo missions.


Launch by Japanese rocket in 2007.



Complex looping flightpath.



The sub-sats were released in lunar orbit.


Friday, March 16, 2012

SPACE-X IS TEN YEARS OLD - AND NOW TAKING US BEYOND THE SHUTTLE ERA



SMN report from David Jefferis:
SpaceX is the sort of company that brings a smile to the face of many a space buff. Under the leadership of Elon Musk, who set the company up a decade ago in 2002, SpaceX has gone from strength to strength. Right now, SpaceX is aiming to make the first commercial flight to the International Space Station, using its Falcon 9 rocket and Dragon capsule combo. And guess what? There’s a model rocket available from SpaceX that you can build and fly.



Amazon supply details
First things first: the only supplier we know of at the moment is Amazon, and they don’t mail the SpaceX rocket  to all countries, so x-fingers you live in an approved locale. Even so, it’s an interesting item, and at about $30 USD, pretty fairly priced, too. When assembled, the kit measures 580 mm (22.8 in) high, equating to 1:88 scale. 


Building the beast
Assembly is very simple, and it’s compatible with Estes model rocketry products, which is a high recommendation, as this writer has flown many an Estes rocket off the pad, and it’s huge fun, even if you do stand to lose the occasional model. 


What a choice
I recall one successful launch, moments after which my partner of the time decided that she was about to have our baby! Suffice to say, the last I knew of that camera-equipped beauty was the sight of it drifting under its parachute, far away into the January mist, never to be seen again. I didn't have to time to fret about it though - after a speedy dash to hospital, I helped the midwife deliver a beautiful baby daughter!


Static or flight mode
Back to the SpaceX kit. You can build it static or flying - it’s your choice, and a parachute is included for flight recovery. Non-scale, but necessary for model flying are the transparent tailfins, which you can leave off if you decide on a static display model.



Summation
A great idea from a pioneering company, and good news for us that SpaceX is into the model spacecraft game. If the SpaceX Falcon-Dragon kit raises some cash to help US astronauts return to the space race, so much the better. 


Humans in space
The Dragon capsule has been designed from the start as a human-rated spacecraft. If all goes well, after a number of trial cargo flights, it’ll take over from the old Space Shuttles, to ferry US astronauts to the International Space Station.

Target: new worlds
There’s more - Elon Musk is thinking long, with eventual aims to shoot for the Moon and Mars. And a developed version of today’s Dragon capsule could make that first touchdown on the distant Red Planet. 

SpaceX at Amazon here.

Estes rockets here.

Assorted space stuff here.

Visit the Lower Hudson Valley E-Gift Shop for a feast of paper model rocketry here.

Good stuff at The Rocketry Blog here.








This pic shows the planned Falcon landing system in use. Art courtesy the talented Stanley Von Medvey, whose blog is here.